Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
(2) Provide the limitations established according to this rule to the rotorcraft
crew through placards in accordance with § 27.1541, instrument markings in
accordance with § 27.1549 and in the Rotorcraft Flight Manual Limitations Section in
accordance with § 27.1583(b). (See paragraphs AC 27.1583 and AC 27.1543.)
AC 27.1521A. § 27.1521 (Amendment 27-23) POWERPLANT LIMITATIONS.
a. Explanation. Amendment 27-23 added §§ 27.1521(g), (h), and (i) that establish
and define the powerplant limitations associated with OEI power ratings. The new
sections introduce the term “OEI” to emphasize and clarify the limitations on the use of
the 2½-minute and 30-minute power ratings. Amendment 27-23 added the introductory
phrase “unless otherwise authorized.” In order to authorize use of these emergency
ratings, additional qualification tests, or other adequate safety measures have been
instituted. The sections set forth specific limitations on the use of these emergency
ratings. These changes were intended to avoid misconceptions regarding the eligibility
of these ratings. Section 27.1521(i) establishes and defines a new continuous OEI
power rating using terminology similar to that developed for the 2½-minute and
30-minute power ratings. These new sections ensure proper recognition in the
powerplant limitations listing required by § 27.1583(b).
b. Procedures. All of the policy material pertaining to this section remains in
effect. Additionally, the following procedures should be considered:
(1) Sections 27.1521(g) through (i) require limitations for OEI operation for
multi-turbine engine powered rotorcraft. The same parameters required for the takeoff
and continuous ratings should be established as limitations for each approved OEI
rating (i.e., maximum rotational speed, time, gas temperature, and torque).
Section 27.923 includes requirements for qualification of the rotor drive system for
2½-minute and 30-minute, and continuous OEI powers. Section 27.1501(a) requires
that information necessary for safe operation should be established as limitations. Thus
the establishment of OEI powerplant limitations is required even though not specifically
addressed in § 27.1521.
(2) It is important to differentiate between the rotorcraft powerplant limitations
and the engine limitations as established under Part 33. For some parameters, these
two limits may be identical, but frequently, the engines will be capable of exceeding the
maximum limitations substantiated for the combined rotorcraft drive system. Limitations
established according to this rule may not exceed the engine limitations established in
accordance with Part 33 but may be less than the Part 33 limits as desired by the
applicant.
AC 27.1521B. § 27.1521 (Amendment 27-29) POWERPLANT LIMITATIONS.
a. Explanation. Amendment 27-29 adds §§ 27.1521(j) and (k). The new
§§ 27.1521(j) and (k) introduce the 30-second and 2-minute OEI power rating
limitations, respectively. These paragraphs define the limitations on the use of the
Page G - 10
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.