Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
9/30/99 AC 27-1B
AC 27.1459. § 27.1459 (Amendment 27-22) FLIGHT RECORDERS.
a. Explanation. The function of the flight recorder, sometimes referred to as a
flight data recorder, is to provide a record of various aircraft and air data parameters
during the operation of the rotorcraft. This data is utilized by accident investigators to
aid in determination of the probable cause of an accident. The problems associated
with acquisition of this data in aircraft not equipped with flight recorders have been
complicated by the use of advanced instrument systems such as EFIS, FADEC, EICAS,
and IDS. The very nature of the operation of these systems precludes the deduction of
post accident data, as was possible with mechanical and electromechanical
instruments, annunciators, hydromechanical engine controls, and switches. The
National Transportation Safety Board (NTSB) therefore made a recommendation to the
FAA that aircraft should be required to have flight recorders. Subsequently Congress
mandated that flight recorders be required on many rotorcraft involved in
passenger-carrying operations in accordance with FAR 91 and FAR 135.
b. Procedures. The following areas are of particular consideration in the approval
of a flight data recorder installation.
(1) Equipment Qualification. The recommended procedure to obtain an
approval for the flight recorder (and associated control panel, if appropriate) is to qualify
the flight recorder to TSO C-124. The required underwater locating device should be
qualified to the provisions of TSO C-121.
(2) Recorded Parameters and Accuracy.
(i) Airspeed. The installed flight recorder should record the airspeed with
an accuracy of 3 percent or 5 knots (whichever is greater) from a speed of 20 knots to a
speed of 80 percent more than VY.
(ii) Flight Recorder. The flight recorder should be capable of recording
the pressure altitude of the rotorcraft with a range of -1,000 feet to the maximum
certified altitude. The error of this recording at sea level should not exceed ±50 feet.
(iii) Direction. The flight recorder should be capable of recording the
magnetic heading of the rotorcraft within at least 10° for any heading. Larger deviations
caused by the temporary operation of high current electrical devices such as heated
windshields are acceptable.
(iv) Vertical Acceleration. The flight recorder should be capable of
recording the normal acceleration of the center of gravity of the rotorcraft. The
recommended range of this recording is an envelope of -3 to +6 G with an accuracy of
at least ±0.2 G.
(v) Time Correlation. The flight recorder should provide a time scaled
correlation between the data recorded and the time at which this information was
Page F - 101
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.