Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
(iv) Description of analyses or tests planned to demonstrate compliance.
(v) Projected schedules of design, analyses, testing, and reporting efforts.
(vi) Methods of test - artificial vs. natural.
(vii) Methods of control of variables.
(viii) Data acquisition instrumentation.
(ix) Data reduction procedures.
(5) Environment.
(i) Definitions.
(A) Supercooled Clouds. Clouds containing water droplets (below 32° F)
that have remained in the liquid state. Supercooled water droplets will freeze upon
impact with another object. Water droplets have been observed in the liquid state at
ambient temperatures as low as -60° F. The rate of ice accretion on an aircraft
component is dependent upon many factors such as droplet size, cloud liquid water
content, ambient temperature, and aircraft component size, shape, and velocity.
(B) Ice Crystal Clouds. Glaciated clouds existing usually at very cold
temperatures where moisture has frozen to the solid or crystal state.
(C) Mixed Conditions. Partially glaciated clouds at ambient temperatures
below 32° F containing a mixture of ice crystals and supercooled water droplets.
(D) Freezing Rain and Freezing Drizzle. Precipitation existing within
clouds or below clouds at ambient temperatures below 32° F where rain droplets remain
in the supercooled liquid state.
(E) Sleet. Precipitation of transparent or translucent pellets of ice which
have a diameter of 5mm or less.
(F) Hail. Solid precipitation in the form of balls or pieces of ice
(hailstones) with diameters ranging from 5mm to more than 50mm.
(ii) Appendix C of Part 29 defines the supercooled cloud environment
necessary for certification of rotorcraft in icing except that the pressure altitude limitation
is that of the rotorcraft or that selected by the applicant, provided the remaining altitude
envelope is operationally practical. Due to air traffic system compatibility constraints,
approval of a maximum altitude less than 10,000 feet pressure altitude should be
discouraged. However, there are operations where a lower maximum altitude has no
Page F - 78
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.