Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Extracted text for finding words
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
(3) Many rotorcraft operators have voiced a high priority on obtaining rotorcraft
approved for operation in icing conditions.
(4) The icing characteristics envelope of FAR Part 25, Appendix C, has served
as a satisfactory design criteria for fixed-wing operations for two decades. The
envelope, as presented, extends to 22,000 feet with possible extension to 30,000 feet
but does not present icing severity as a function of altitude. At the time the envelope
was derived, it was assumed that all transport category airplanes would operate to at
least 22,000 feet. For present state-of-the-art rotorcraft, this assumption is not valid. As
such, an altitude-limited icing envelope based on the same data used to derive the
Part 25, Appendix C, and the Part 29, Appendix C, envelopes is presented as an
alternate to the full-icing envelope.
b. Explanation.
(1) General.
(i) The discussion in this paragraph pertains generally to certifications to
the full-icing envelope of Part 29, Appendix C, within the altitude limitations of the
rotorcraft or to the altitude-limited icing envelope based on a 10,000-foot pressure
altitude limit. The actual icing envelope considered may be further restricted based on
the actual pressure altitude envelope for which certification is requested. It envisions
certification with full ice protection systems (rotor blades, windshields, engine inlets,
stabilizer surfaces, etc.). With the exception of pilot controllable variables such as
altitude and airspeed, limited certification (either in terms of icing envelope or protection
capability) is not envisaged at this time due to the difficulty in forecasting the severity of
icing conditions, relating the effects of the forecasted conditions to the type of aircraft,
and the effects of reported icing among various types of aircraft, particularly between
fixed- and rotary-wing aircraft. In addition, with a limited protection capability, viable
escape options may not be operationally available if limitations are exceeded.
(ii) The discussion in this paragraph, regarding rotor blade ice protection,
is oriented primarily toward electrothermal rotor deicing systems, since these have the
most widespread acceptance and projected use within the industry. Also, most of the
testing and research into rotorcraft ice protection to date has been conducted with these
types of systems. Research is continuing with other types of systems such as anti-icing
fluid systems, and information will be added to address certification of these as
necessary. It should also be noted that most of the rotorcraft icing experience
accumulated to date has been on rotorcraft with symmetrical airfoil sections. The
application of this experience to rotorcraft with asymmetrical airfoils should be carefully
evaluated. Limited experience has been gained during development and qualification
testing of the Army Blackhawk on asymmetrical airfoil icing characteristics. The most
prominent difference appears to be a more rapid degradation of airfoil performance.
Rapidity of performance degradation is also dependent upon severity of the icing
condition (primarily a function of liquid water content) and ice shape (primarily a function
of OAT and median volumetric droplet diameter (MVD)).
Page F - 76