Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
9/30/99 AC 27-1B
SUBPART F - EQUIPMENT
SAFETY EQUIPMENT
AC 27.1411 § 27.1411 (Amendment 27-11) SAFETY EQUIPMENT--GENERAL.
a. Explanation.
(1) This section contains requirements for the accessibility and stowage of
required safety equipment. Compliance with this section should ensure that:
(i) Locations for stowage of all required safety equipment have been
provided.
(ii) Safety equipment is readily accessible to both crewmembers and
passengers, as appropriate, during any reasonably probable emergency situation.
(iii) Stowage locations for all required safety equipment will adequately
protect such equipment from inadvertent damage during normal operations.
(iv) Safety equipment stowage provisions will protect the equipment from
damage during emergency landings when subjected to the inertia loads specified in
§ 27.561.
(2) It is a frequent practice for the rotorcraft manufacturer to provide the
substantiation for only those portions of the ditching requirements relating to aircraft
flotation and ditching emergency exits. Completion of the ditching certification to
include the safety equipment installation and stowage provisions is then left to the
affected operator so that those aspects can best be adopted to the selected cabin
interior. In such cases, the “Limitations” section of the Rotorcraft Flight Manual should
identify the substantiations yet to be accomplished in order to justify the full ditching
approval. The operator (or modifier) performing these final installations is then
concerned directly with the details of this paragraph. Any aspects of the basic rotorcraft
flotation and emergency exits approval that are not compatible with the modifier’s
proposed safety equipment provisions should be resolved between the type certificate
holder and the modifier prior to FAA/AUTHORITY approval for ditching. (See
paragraphs AC 27.801a(9) and AC 27.1415a(3).)
b. Procedures.
(1) A cockpit evaluation should be conducted to demonstrate that all required
emergency safety equipment to be used by the crew will be readily accessible during
any probable emergency situation. This evaluation should include, for example,
emergency flotation equipment actuation devices, remote liferaft releases, hand fire
extinguishers, and protective breathing equipment.
Page F - 71
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.