Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
AC 27.1401. § 27.1401 (Amendment 27-10) ANTI-COLLISION LIGHT SYSTEM.
a. Certification for night operations requires an approved aviation red anti-collision
light. Determination of the location and how many anti-collision lights are required to
satisfy the regulations are functions of aircraft shape and the ability to obtain the
required area coverage and light intensity. A detailed explanation of how to calculate
the measured area coverage required by § 27.1401(b) is given in AC 20-30B. An
explanation of the methods used to measure and calculate the light intensity and color
required by § 27.1401(e) are explained in AC 20-74.
b. The anti-collision light(s) should be located to obtain the required coverage and
to prevent cockpit reflections that would affect the crew’s vision. The anti-collision lights
are required to be red to reduce cockpit reflections and objectionable effect of rotor
blade strobing. During the period of August 11, 1971, through February 4, 1976, white
lights were permitted by the rules; however, white lights resulted in undesirable cockpit
reflections at night and in close proximity to clouds. For these reasons, white lights are
not considered to be satisfactory in all operating conditions. Section 27.1401(b) was
changed in 1976 to require a red anti-collision light. White lights have been approved
for installation on rotorcraft when they were installed in addition to the required red
lights, if an independent control for the white light was provided that allowed the pilot to
eliminate any adverse cockpit reflections.
Page F - 70
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.