FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page F-68

PDF page 677 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 677
AC 27-1B · F-68Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B                                                                  9/30/99


     b. Procedures.

         (1) The performance requirements of this standard are normally evaluated by a
flight test pilot, and usually are included in the Type Inspection Authorization as part of
the evaluation to be conducted at night.

         (2) The installation of the landing light unit(s) should be very carefully
evaluated. Many of the units provided are stowed until needed and then driven to their
operating position by an electric motor.  If this type of light unit is provided, the
possibility of its contact with fuel fumes should be considered. Installations that have
this problem normally require the use of light units qualified as explosion proof. The
installation should also be reviewed to determine if a single failure can cause the light to
be on in the stowed position.  If the light can be on, the potential for overheat or fire in
the adjacent area should be considered.

AC 27.1385.   § 27.1385 POSITION LIGHT SYSTEM INSTALLATION. Refer to
                Advisory Circular 20-74, “Aircraft Position and Anticollision Light
               Measurements.”

AC 27.1387.   § 27.1387 (Amendment 27-7) POSITION LIGHT SYSTEM DIHEDRAL
            ANGLES. Refer to Advisory Circular 20-74.

AC 27.1389.   § 27.1389 POSITION LIGHT DISTRIBUTION AND INTENSITIES.
               Refer to Advisory Circular 20-74.

AC 27.1391.   § 27.1391 MINIMUM INTENSITIES IN THE HORIZONTAL PLANE OF
          FORWARD AND REAR POSITION LIGHTS. Refer to Advisory
                 Circular 20-74.

AC 27.1393.   § 27.1393 MINIMUM INTENSITIES IN ANY VERTICAL PLANE OF
          FORWARD AND REAR POSITION LIGHTS. Refer to Advisory
                 Circular 20-74.

AC 27.1395.   § 27.1395 MAXIMUM INTENSITIES IN OVERLAPPING BEAMS OF
          FORWARD AND REAR POSITION LIGHTS. Refer to Advisory
                 Circular 20-74.

AC 27.1397.   § 27.1397 (Amendment 27-6) COLOR SPECIFICATIONS. Refer to
                Advisory Circular 20-74.

AC 27.1399.   § 27.1399 (Amendment 27-2) RIDING LIGHT.

     a. Explanation. The riding light is an amphibious operation requirement. The
function of this light is to make the rotorcraft visible at night to other vessels when the
rotorcraft has landed on water. A very important point which should be remembered is


Page F - 68

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →