FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page F-62.13

PDF page 671 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 671
AC 27-1B · F-62.13Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 4                                                     3/31/2014

AC 27.1357.    § 27.1357 (Amendment 27-13) CIRCUIT PROTECTIVE DEVICES.

     a. Explanation. Circuit protective devices are normally installed to limit the
hazardous consequences of overloaded or faulted electrical circuits. These devices are
resettable (circuit breakers) or replaceable (fuses) to permit the crew to restore service
when nuisance trips occur or when the abnormal circuit condition can be corrected in
flight.

     b. Procedures.

         (1) The circuit protective devices for systems essential to safety in flight should
not be tripped by faults in other circuits.

                  (i) Systems that are essential to safety in flight are generally those systems
that are required to show compliance with the regulations. These essential systems
include the basic electrical system, the distribution system, and many electrical
utilization systems.

                   (ii) An electrical utilization system is a system of electrical equipment,
devices, and connected wiring using electrical energy to perform a specific aircraft
function.

                    (iii) The specific utilization systems, which are necessary to maintain
controlled flight and land safely, will vary with the type of rotorcraft and with the nature
of operations. Examples of systems that may be essential are basic flight instruments,
minimum navigation equipment, minimum radio communications, and flight control
systems.

         (2) Automatic reset circuit breakers, which automatically reset themselves,
should not be used as circuit protective devices.  If an abnormal circuit condition cannot
be corrected in flight, the decision to restore power to the circuit should result from a
careful analysis by the flightcrew and cannot be performed by automatic reset circuit
breakers. To ensure crew supervision over the reset operation, circuit protective





                                                       Page F - 62.13

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →