Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
6/23/23
AC 27-1B, Chg 9
§ 27.1309(b) and (c) may result in required periodic maintenance actions or flight crew
alerting features. For example, an over-temperature warning system may be necessary
to allow the flight crew to manage potentially unsafe system operating conditions.
Provide rationale for alerting requirements (or for why an alert is not needed) in the
system safety assessment of the battery installations to demonstrate compliance with
§ 27.1309(c). Such alerts, if provided, must comply with § 27.1322.
(B) The ICA should include the following provisions to comply with
§ 27.1529:
1. Maintenance requirements to replace each non-rechargeable lithium
battery within an interval that will ensure there is sufficient charge to power equipment.
2. A requirement to only replace non-rechargeable lithium batteries with
batteries from the same manufacturer with the same part number or to obtain a new
FAA approval for installing a different battery. Refer to the battery Original Equipment
Manufacturer’s maintenance manual.
3. Procedures to ensure that each non-rechargeable lithium battery has not:
i. Experienced degraded charge retention ability or other damage
during storage.
ii. Been damaged from environmental or physical impacts such as
mechanical shock, vibration, heat and possible abuses encountered during storage,
transportation prior to their installation, or maintenance activities on or around them.
iii. Precautions to prevent mishandling of replacement non-
rechargeable lithium batteries prior to their installation that could result in short-circuit or
other unintentional damage.
Note: Acceptable procedures for paragraphs b(2)(ix)(B)3.i. and b(2)(ix)(B)3.ii. may
include a quality control process for packaging, storing, maintaining, and transporting
non-rechargeable lithium batteries, including reporting of dropped or damaged batteries.
Page F - 62.12
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.