FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page F-58

PDF page 654 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 654
AC 27-1B · F-58Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B                                                                  9/30/99

               (5) Cruise at maximum altitude until all generator temperatures stabilize.
Temperatures shall be considered stabilized when they have peaked and have not
increased for a period of 5 minutes.

               (6) Descend, conduct an approach to include a go-around, hover until
temperature stabilizes, then land and continue to record temperatures after shutdown
until 5 minutes after all temperatures have peaked.

               (7) Conduct cooling tests with the rotorcraft hovering at both the minimum
and maximum hover altitudes.

               (8) Correct all results for hot day conditions. Use the standard lapse rate
of 3.6° F/1,000 feet for consideration of altitude. See paragraph AC 27.1309b(2)(i) for
details on temperature correction.

             (C) Manufacturer’s Limits.  If at any time during the testing it appears the
manufacturer’s limits are to be exceeded, the amperage load on the test
generator/alternator should be reduced to prevent this from happening.

             (D) Miscellaneous. The results obtained from the tests should be
corrected for hot day conditions using a standard lapse rate (3.6° F/1,000 feet). The
tests are conducted to determine the maximum generator capacity that does not result
in surpassing the limits given from the manufacturer. This is for a continuous rating; any
credit for short time over current ratings must also be verified by the same methods,
particularly for short time ratings longer than 5 seconds.

         (5) Instruments. Voltage and current supplied by each generator are
parameters which define system operation. Some systems are provided with voltmeters
and ammeters to display these parameters to the crew. These instruments may be
multifunctional with switches to select the functions displayed. Some designs have
annunciated safe operation of each generator with lights and have no voltmeter and
ammeter.  If additional limitations, such as maximum loading of portions of the systems,
are necessary to account for fault condition, that information should be made available
to appropriate personnel (crew, owner, modifier, etc.) to ensure the limits are not
exceeded.

         (6) An external power source supplying reverse polarity or reverse phase
sequence to the rotorcraft electrical system could seriously damage the system. This
paragraph requires a means to prevent such an occurrence. This can be accomplished
by use of a standard polarized receptacle and protective relays.

AC 27.1353. § 27.1353 (Amendment 27-14) STORAGE BATTERY DESIGN
         AND INSTALLATION.

     a. Explanation. Batteries must not be designed and/or installed to create a
hazard to the rotorcraft under any operating conditions.


Page F - 58

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →