FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page F-36

PDF page 623 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 623
AC 27-1B · F-36Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B                                                                  9/30/99

         (1) Red shall be reserved for annunciation of emergency conditions requiring
immediate corrective action. Typical examples include fire, transmission oil pressure,
engine failure, and battery overheat. The use of red for annunciators which do not
require immediate action must be avoided. Use of red when it is not needed tends to
lessen the impact of a red annunciator and the needed pilot association for immediate
action. In evaluating cockpit annunciators for acceptability, the FAA should ensure all
annunciators which require immediate action are red and that only those requiring such
action are red.  If a master warning light is provided, it should be red, and it should be
powered by the same signal that powers any of the individual red warning signals. An
aural warning may accompany visual warning signals to enhance pilot response. Care
should be taken that any aural signal is sufficiently distinct from other aural warnings,
such as low rotor RPM to prevent confusion and to ensure proper crew response. A
means to deactivate and reset the master warning (visual and aural) is required.
Resetting the master warning must not deactivate any individual warning signal.

         (2) Amber shall be reserved for indicating malfunction or failure conditions
which do not require immediate crew action to ensure safe flight. Typical examples
include door unlatched, inverter failure, generator failure, fuel filter clogged, and parking
brake engaged. Amber should generally be utilized for malfunction and failure
conditions which do not require immediate action. The key word here is “require.”
Obviously, a pilot should perform corrective action for malfunction or failure conditions in
a timely manner as soon as other cockpit priorities allow. The time increment
associated with “immediate action” may vary with the system involved, the flight regime,
and the aircraft; however, 15 seconds is a representative value in evaluating this term.
This by no means indicates that any red annunciator can be ignored for 15 seconds.
For red annunciators, some type of immediate pilot response is expected.  If immediate
pilot action is not required, the FAA should recommend the use of an amber
designation.  If a master caution light is provided in addition to a master warning light,
the master caution annunciator should be amber, and should be powered by the same
signal that powers any of the individual amber caution signals. Reset considerations for
the master caution are the same as those detailed above for the master warning.

         (3) Green signifies a safe operating condition and more specifically has come
to signify landing gear extended and locked. Extensive use of green annunciators
throughout the cockpit should generally be avoided due to possible confusion with the
special use of green for landing gear.  If green annunciators are physically and
functionally removed from the landing gear operation, they may be found acceptable for
a variety of “safe operating” applications. One such application is “all green for
approach” used in autopilot, flight director, and other navigation system displays.

         (4) Other colors may be utilized as advisory lights in accordance with
§ 27.1322(d). Red and amber must not be used as advisory lights due to the possibility
of introducing confusion into the cockpit. Obviously, yellow and pink annunciators
should be avoided due to their similarity to amber and red. White and blue have been
successfully utilized as advisory segments in past civil designs.



Page F - 36

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →