Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
3/31/2014 AC 27-1B, Chg 4
AC 27.1316 § 27.1316 (Amendment 27-46) ELECTRICAL AND ELECTRONIC
SYSTEM LIGHTNING PROTECTION.
a. Explanation.
(1) During the original design and development of rotorcraft and the
development of regulations concerning these aircraft, little attention was given to
protection from the meteorological phenomenon of lightning. This was, in part, because
the early aircraft were constructed mostly of metal and had little, if any, dependence on
advanced technology systems. Contemporary design of rotorcraft utilizes the same
advanced technology systems and materials as airplanes. Because of this, a specific
requirement was added by Amendment 27-46 establishing standards for lightning strike
protection of required systems, equipment, and installations. Section 27.1316 replaces
paragraph (d) of § 27.1309, which previously defined the consideration required for the
foreseeable operating condition of a lightning strike encounter on the rotorcraft and
systems.
Note: Aviation authorities in other countries may not have issued regulations or
standards similar to § 27.1316 for lightning protection. As a result, authorities
in other countries may use other means, such as special conditions, to
establish requirements for lightning protection.
b. Procedures.
(1) Guidance for you to show compliance with the applicable sections of
§ 27.1316 is available in a dedicated AC 20-136B. AC 20-136B is available for
download from the FAA Regulatory Guidance Library website at http://rgl.faa.gov/.
(2) EASA Interpretative Material is introduced by a CRI referring to EUROCAE
documents (ED) ED-113, ED-81, and FAA AC 20-136B.
Page F - 31
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.