Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 4 3/31/2014
AC 27.1317. § 27.1317 (Amendment 27-42) HIGH INTENSITY RADIATED
FIELDS (HIRF) PROTECTION.
a. Explanation.
(1) Regulations amendments in 2007 added requirements for the protection of
aircraft electrical and electronic systems from the effects of High Intensity Radio
Frequency (HIRF) environment. This effort was due to technological advances in
airframe and electronic systems design and a concurrent increase in the levels of
radiated power in the aircraft environment. These changes have raised vulnerability to
the electromagnetic environment of the electrical and electronic systems, which perform
critical and essential functions. Prior to this regulatory requirement, the issuance of
special conditions for products involving advanced electrical and electronic systems
provided an adequate level of safety. The new regulation included a five-year period of
relief from the new testing requirements by allowing an applicant to show that the
system continues to comply with previously issued HIRF special conditions. Beginning
December 1, 2012, data used to show compliance as part of a previously issued special
condition is no longer accepted as a means of showing compliance with paragraph (a)
of § 27.1317. All systems will be required to show compliance data to the appropriate
paragraphs and sections of the regulation, based on the HIRF safety analysis.
(2) EASA has not yet adopted regulatory requirements for HIRF protection.
EASA is using special conditions invoking the JAA INT POL 27/29-1 Issue 3, dated
January 10, 2003. The requirements addressed in the JAA INT POL are similar to
those of § 27.1317(a)(b)(c).
b. Procedures.
(1) Guidance for you to show compliance with the applicable sections of
§ 27.1317 is available in AC 20-158. This AC is available for download from the FAA
Regulatory Guidance Library website: http://rgl.faa.gov/
(2) EASA Interpretative Material provided in EUROCAE ED-107 and
AMJ 20.1317 is considered by the FAA to be technically equivalent to the guidance
material in AC 20-158 and may be used as a means of compliance with § 27.1317.
Page F - 32
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.