Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 96/23/23
2. Automatic control of the engine cannot be lost for any appreciable
period of time. The engine should not be allowed to be out of control for a period of time
that will result in a hazard in a worst-case flight condition. Any rapid, uncontrolled
divergence would not be acceptable.
3. No crew action should be required to reset the system. This is not to
imply that the system cannot be designed with a manual reset, but the manual reset
cannot be used to show compliance to recover from a digital upset.
4. The resumption of engine control after an upset should be
reasonably within the range that existed before the upset.
5. No critical data can be lost.
6. After the system recovers, if the performance of the system has
been degraded in a noncritical manner that would reduce the capability of the rotorcraft
or the ability of the pilot to cope with adverse operating conditions, then an alert to the
crew about this system degradation is needed.
(F) System Installation Considerations. In most cases, the installation of
the system components is a constituent part of the lightning protection. This is
particularly true in the use of shielding techniques. If these installation features are
required for adequate lightning protection, consideration should be given to ensure that
their effectiveness is not derogated in service. ICAs must be furnished to the aircraft
owner on initial delivery, and thereafter made available to parties who service and
operate the rotorcraft, to allow them to take actions necessary to ensure the continued
effectiveness of the system lightning protection. See § 21.50(b).
Page F - 30.25
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.