FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page F-30.22

PDF page 612 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 612
AC 27-1B · F-30.22Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

                                              AC 27-1B, Chg 9
6/23/23



                      (ii) Procedures. Although not a regulatory requirement, it is recommended
  that a formal written certification plan be used to assure regulatory compliance. The use
  of this plan is beneficial to both the applicant and the FAA because it identifies and
  defines an acceptable resolution to critical issues early in the certification process.
 These are the usual steps to be followed when utilizing a certification plan:


                (A) Prepare a certification plan that describes the analytical procedures
 and the qualification tests to be utilized to demonstrate protection effectiveness. Test
  plans should describe the rotorcraft and FADEC system to be utilized, test drawing(s)
  as required, the method of installation that simulates the production installation, the
  lightning zone(s) applicable, the lightning simulation method(s), test voltage or current
  waveforms to be used, diagnostic methods, and the appropriate schedules and
  location(s) of proposed test(s).

                (B) Obtain FAA concurrence that the certification plan is adequate.

                (C) Obtain FAA concurrence on detail part conformity of the test articles
 and installation conformity of applicable portions of the test setup.

              (D)Schedule FAA witnessing of the test.

                (E) Submit a final test report describing all results and obtain FAA
  approval of the report.


                        (iii) Definition of Environment. The SAE AE4L Committee report dated
 June 6, 1999, remains acceptable criteria to define the worst-case lightning strike that
 may be encountered by the rotorcraft in service. An additional explanation of the
  lightning environment can be found in FAA Report DOT/FAA/CT-89/22, Aircraft
  Lightning Protection Handbook. This handbook will assist aircraft design,
  manufacturing, and certification organizations in protecting aircraft against the direct
 and indirect effects of lightning strikes, in compliance with the FAA’s regulations. It
  presents comprehensive test criteria to provide the essential information for the in-flight
  lightning protection of all types of fixed wing, rotary wing, and powered lift aircraft of
  conventional, composite, and mixed construction and their electrical and fuel systems.
 The handbook contains chapters on the natural phenomenon of lightning, the interaction
 between the aircraft and the electrically charged atmosphere, the mechanism of the
  lightning strike, and the interaction with the airframe, wiring, and fuel system. Further
  chapters cover details of designing for optimum protection; the physics behind the
  voltages, currents, and electromagnetic fields developed by the strike; and shielding
  techniques and damage analysis. The handbook ends with discussion of test and
  analytical techniques for determining the adequacy of a given protection scheme. For
 new designs and applications, the revised definitions of the lightning environment in AC


                             Page F - 30.22

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →