Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 4 3/31/2014
(B) Obtain FAA/AUTHORITY concurrence that the certification plan is
adequate.
(C) Obtain FAA/AUTHORITY detail part conformity of the test articles and
installation conformity of applicable portions of the test setup.
(D) Schedule FAA/AUTHORITY witnessing of the test.
(E) Submit a final test report describing all results and obtain
FAA/AUTHORITY approval of the report.
(iii) Definition of Environment. The SAE AE4L Committee report dated June
6, 1999, has been and remains acceptable criteria to define the worst-case lightning
strike that may be encountered by the rotorcraft in service. An additional explanation of
the lightning environment could be found in FAA Report DOT/FAA/CT-89/22, “Aircraft
Lightning Protection Handbook.” This handbook will assist aircraft design,
manufacturing, and certification organizations in protecting aircraft against the direct
and indirect effects of lightning strikes, in compliance with 14 CFR regulations. It
presents a comprehensive test criteria to provide the essential information for the
in-flight lightning protection of all types of fixed wing, rotary wing, and powered lift
aircraft of conventional, composite, and mixed construction and their electrical and fuel
systems. The handbook contains chapters on the natural phenomenon of lightning, the
interaction between the aircraft and the electrically charged atmosphere, the
mechanism of the lightning strike, and the interaction with the airframe, wiring, and fuel
system. Further chapters cover details of designing for optimum protection; the physics
behind the voltages, currents, and electromagnetic fields developed by the strike; and
shielding techniques and damage analysis. The handbook ends with discussion of test
and analytical techniques for determining the adequacy of a given protection scheme.
On September 7, 2011, FAA Advisory Circular AC 20-136B, “Aircraft Electrical and
Electronic System Lightning Protection” was issued, superseding previous versions of
that AC. For new designs and applications, this revised definition of the lightning
environment should be used.
(iv) Certification Plan. The following subjects are not intended to provide a
complete list of the items which should be included in the certification plan, but rather
highlight some of the areas which should receive consideration. The certification plan
should address the total protection which is required to allow the FADEC to continue to
operate properly when the rotorcraft experiences a worst-case lightning strike
encounter.
(A) Determination of Lightning Strike Attachments. Determine the
locations on the rotorcraft where lightning strike attachment is likely to occur and the
portions of the airframe through which currents may flow between attachments. The
main and tail rotors are recognized as likely attachment points; however, consideration
should be given to all possible attachment points. The swept stroke phenomenon may
Page F - 22
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.