FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page F-16

PDF page 576 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 576
AC 27-1B · F-16Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 4                                                     3/31/2014


                          altitude.  It can be no less than 100° F (reference § 27.1043(b));
                    however, it can be as high as the applicant wants.

            Th mar =  Temperature margin between the maximum equipment
                     temperature substantiated in the laboratory and the maximum
                         installed equipment temperature when the rotorcraft is operating
                          in the highest available OAT and approximately corrected at the
                         altitude under consideration.  If the margin is zero or positive, the
                   equipment passes.  If the margin is negative, the equipment fails
                      the test.

            Th mar =  Tmax - (Ttest max + (Torh - Toat max))

           Example #1: Assume the applicant is seeking approval for rotorcraft
operation at the lowest acceptable OAT, at sea level, of 100° F and Tmax for Generator
Brush = 295° F at maximum load current throughout the altitude range.  In-flight test
data are:

                           Measured
              Altitude (ft, MSL)    Cylinder Temp (TTEST MIN)    OAT = TOAT MAX
              sea level               275°F                  90°F
                5,000                 270°F                  80°F
               10,000                285°F                  60°F
               15,000                294°F                  42°F
               20,000                290°F                  20°F

                First, Torh must be calculated for each altitude test point.

    @ sea level, Torh = 100° F
    @ 5,000 ft., Torh = 100° F -5,000 ft., x 3.6°/1,000 ft. = 82° F
    @ 10,000 ft., Torh = 100° F - 10,000 ft. x 3.6°/1,000 ft. = 64° F
    @ 15,000 ft., Torh = 100° F - 15,000 ft. x 3.6°/1,000 ft. = 46° F
    @ 20,000 ft., Torh = 100° F - 20,000 ft. x 3.6°/1,000 ft. = 28° F

       Then at sea level:

           Th mar = 295 - (275 + (100 - 90)) = 10° F

        At 5,000 feet:

           Th mar = 295 - (270 + (82 - 80)) = 23° F

        At 10,000 feet:

           Th mar = 295 - (285 +(64 - 60)) = 6° F



Page F - 16

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →