FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page F-11.1

PDF page 570 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 570
AC 27-1B · F-11.1Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

                                              AC 27-1B, Chg 9
6/23/23

AC 27.1305C. § 27.1305 (AMENDMENT 27-51) POWERPLANT INSTRUMENTS.


    a.   Explanation. Amendment 27-51 revised § 27.1305(e), (k), (n), and (o) to
 incorporate flexibility for the use of a synthesized power indicator (SPI).

    b.  Procedures. The purpose of the SPI display is to reduce pilot workload by
 providing an indicator showing a single parameter that is closest to the applicable
 engine or transmission limit, versus monitoring individual engine parameters. The SPI
 display for reciprocating engines presents a normalized indication of the current engine
 manifold pressure and engine RPM. For turbine engines, the SPI display presents
 normalized indications of the engine power or torque, gas temperature, and engine
compressor speed output. The normalized value is presented to the flight crew on the
 primary flight displays, along with a caption indicating the nearest engine limiting
parameter (engine manifold pressure, RPM, torque, gas temperature indicator, engine
compressor speed, as applicable) that is being used for the SPI display calculation. The
SPI display function is typically performed by the avionics suite using data provided by
 the engine FADEC.

 Section 27.1305 establishes the required powerplant instruments and warning and
 caution annunciations that must be displayed within the view of the flying pilot. These
have traditionally been independent instruments and are needed not only to measure
 the performance output of the engines, but they collectively allow the flying pilot to
 continuously monitor the condition and health of the engines.

The absence of continuously displayed engine manifold pressure and RPM for
 reciprocating engines or engine torque, gas temperature, and engine compressor speed
parameters may affect the pilot’s ability to directly monitor the health and condition of
each engine. In addition, the absence of individual gauges deprives the pilot of the
 ability to quickly assess trend or rate of change information and proximity to individual
parameter limits, and to accurately compare engine-to-engine data. As a result, in
 addition to the requirements in §§ 27.1305 and 27.1549, the SPI display must also meet
 the requirements of § 27.1321.

      The applicant’s description and justification of the SPI display should address the
 following:


        (1) The accuracy of the engine power and other engine indications to safely
 conduct Category B and, when applicable, Category A operations (power setting, NR
 control, piloting a given rating with precision).

        (2) The flight crew must be able to assess how close the indicated parameter is
 relative to the limit, including the transitions from one limiting factor to another (engine
 manifold pressure to engine RPM or engine torque to gas temperature indicator to
 engine compressor speed), and the ability to quickly and accurately compare engine-to-


                               Page F - 11.1

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →