FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page F-9

PDF page 567 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 567
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

9/30/99                                             AC 27-1B

     b. Procedures. The requirement and purpose for each instrument is
self-explanatory in the amendment. Other sections that should be considered when
designing powerplant instruments are listed in paragraph AC 27.1305.

AC 27.1305B.   §27.1305 (Amendment 27-29) POWERPLANT INSTRUMENTS.

     a. Explanation. Amendment 27-29 added Sections 27.1305(t) and 27.1305(u) to
provide for 30-second/2-minute OEI power ratings.

         (1) Section 27.1305(t) adds the requirement that a device or means be
provided to alert the crew of the use of the 30-second and 2-minute OEI power level.
The crew should be alerted when the 30-second or 2-minute interval begins and when
the time interval ends. The amount of time spent at the 30-second or 2-minute OEI
power levels is at the crew’s discretion, unlike the other limits (i.e., torque, measured
gas temperature, and gas generator speed) for 30-second OEI that are set by an
automatic control required by § 29.1143. The purpose for providing the time interval
alerts and automatically controlling the 30-second OEI limits is to free the crew from
monitoring the engine instruments during critical phases of flight caused by the loss of
an engine.

         (2) Section 27.1305(u) adds the requirement for a device to record the usage
and the amount of time spent at the 30-second OEI power level and the amount of time
spent at the 2-minute OEI power level. The information recorded by this device is for
the use of the ground crew to determine if maintenance actions/inspections are to be
conducted.

     b. Procedures. For the purpose of complying with FAR 27.1305(t) and
27.1305(u), the 2-minute OEI power level is considered to be achieved whenever one or
more of the operating limitations applicable to the next lower OEI power rating are
exceeded. The 30-second OEI power level is considered to be achieved whenever one
or more of the operating limitations applicable to the 2-minute OEI power rating are
exceeded.

         (1) A review of the method to meet the requirements of Section 27.1305(t)
should be conducted by the FAA/AUTHORITY Flight Test pilot. A determination should
be made as to whether the method used to alert the crew of 30-second or 2-minute OEI
power usage can be recognized and understood by the crew.

         (2) To meet the requirements of Section 27.1305(u), a device should be
installed on the engine or the airframe to record the time and each usage of 30-second
and 2-minute OEI power levels. The information on the time and usage of 30-second
and 2-minute OEI power should be recoverable from the recording device by ground
personnel. The device should not be capable of being reset in flight and should only be
capable of being reset by ground personnel. Prior to each flight this device should be
capable of being checked for proper operation and to determine if 30-second or
2-minute OEI power levels were used during the previous flight.


                                                        Page F - 9

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →