FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page B-3

PDF page 51 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 51
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

9/30/99                                            AC 27-1B


AC 27.25. § 27.25 (Amendment 27-14) WEIGHT LIMITS.

     a. Explanation.

         (1) This section is definitive and specifies criteria for establishing maximum and
minimum certificating weights. These weights may be based on those selected by the
applicant, design requirements, or the limits for which compliance with all applicable
flight requirements has been shown.

         (2) Typical requirements that may establish the maximum and minimum weight
limits include:

                  (i)   Maximum: Structural limits, performance requirements, stability, and
controllability requirements.

                   (ii)   Minimum: Autorotative rotor RPM, stability, and controllability
requirements.

         (3) Jettisonable External Cargo.

                  (i)    Section 27.25(c) was added by Amendment 27-11 to provide a basis
for approving an increased gross weight that would be an external jettisonable load.
Section 27.865, “External load attaching means, “ includes hoist and hook design
features for the load attaching devices that were added to Part 27 but removed from
§ 133.43. Part 133, “Rotorcraft External-Load Operations,” was also amended
(Amendment 133-5) concurrently to complement the changes to Parts 27 and 29.

                   (ii)   Approvals under the policy in Review Cases Nos. 37 and 55 of FAA
Order 8110.6 were no longer necessary. These review cases concerned the
policy/standards for external cargo configurations using a cargo hook whenever the
standard limitations were exceeded.  If the standard limitations were not exceeded,
external cargo hooks and hoists and external cargo configuration approvals could be
made under Part 133, Subpart D, prior to Amendment 133-5.

                    (iii)   In the preamble of Amendment 27-11 (Proposal 2-99, 41 FR 55454;
December 20, 1976) the agency stated that “...§ 27.25(c) and § 29.25(c) are intended to
provide only a total weight standard for approving the rotorcraft structure for operation
under Part 133.” The policy in Review Case No. 55 also indicates the powerplant or
propulsion system is also subject to evaluation for the increased weight. As indicated in
§ 27.865, fatigue substantiation of the external cargo attaching means is not required.
The rotorcraft structure, rotors, etc., are only subject to fatigue evaluation under
§ 27.571 whenever the standard structural limitations are exceeded (Review Case
No. 55).

               (iv)  Whether or not the standard limitations are exceeded, the flight
characteristics evaluations/standards of § 133.41 are appropriate even for engineering


                                                           Page B - 3

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →