FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page E-72

PDF page 490 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 490
AC 27-1B · E-72Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B                                                                  9/30/99

     d. § 27.967(d):

         (1) Explanation. This paragraph is intended to prevent hazards to integral fuel
tanks to be expected by impingement of flames or products of combustion from an
engine compartment fire.

         (2) Procedures. Review the design for relative positions of engine
compartments and integral fuel tanks to estimate the flowpath of fire or heat from an
engine compartment fire. Consider autorotation for single-engine rotorcraft and, for
multiengine rotorcraft, low power descent as power-on flight in this evaluation.  If
questionable compliance exists, clear indication of the flow impingement patterns may
be identified by ejecting dye from engine compartment openings during flight.

AC 27.969.  § 27.969 FUEL TANK EXPANSION SPACE.

     a. Explanation.

         (1) Space must be provided in each fuel tank system to allow for expansion of
the fuel as a result of a fuel temperature increase. The space provided for this purpose
must have a minimum volume equal to 2 percent of the tank capacity.

         (2) The fuel tank filling provisions must be designed to prevent inadvertent
filling of the fuel tank expansion space when fueling the rotorcraft in the normal ground
attitude on level ground.

     b. Procedures.

         (1) Fuel tanks with interconnected vents need not have provisions for fuel
expansion in each tank if equivalent expansion provisions are available in another area.

         (2) The fuel filler ports should be located below the designated fuel expansion
space height to ensure that the fuel expansion space cannot be inadvertently filled with
fuel.

         (3) Each fuel tank expansion space must comply with the venting requirements
of § 27.975.

         (4) For multiengine rotorcraft using a single expansion tank to satisfy the
requirements of this regulation, the effect of blockage or failure of any vent from this
common tank must be considered with respect to compliance with the applicable engine
isolation requirements.

AC 27.969A.    § 27.969 (Amendment 27-23) FUEL TANK EXPANSION SPACE.

     a. Explanation. Amendment 27-23 allows some interconnected fuel tanks to have
a common expansion space in lieu of individual expansion spaces. This change


Page E - 72

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →