FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page E-61

PDF page 479 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 479
AC 27-1B · E-61Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

9/30/99                                             AC 27-1B



        l





                           Fl!3URE AC 27 .955-1 FUEL FLOW




                                (1l Point A on ftQL!re AC 27.955- •J 1s me hrgnest f1.1et ni;,ww1th1n
                    air.tr1:lft limltations, out th$ system P.Jes.sure drop is not ei p$cted tci· be
             rnax1mu1T1 because of t)il:e low kinematic iuel visco:sify.
                              02) Point 13 isme rnaximl,lrn flow .at cdld t.emp$r:atures but as
            ~:e fuel temp:erattir.e is irntJ;er reducH·£l, the iuel visco.s1ty increases very
                 rapidl\.:.
                              (31 Point C repfiBSerttsthe rnax1murn.visco.s1ty of the iuel, .but
                 th:e. fui,i flow is smnewhat reuuced frorn point B. Tha maximum sysrem
                    pr-e.ss.1./r:e i:fops ·and.. therefore. minimum f.uel inlet pre.ssurse m.ay .oc.eu-i-
               1:!efwe-en points  l::l and C dep::enuln:g on the sp·ecifit 1·elE1tlollSl1lp of f.uel
             viscosity to. raqUired fuel f,Ji:i.w.





                                                       Page E - 61

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →