Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
systems as do airplanes. Because of these facts the possibility of a lightning strike
encounter to the rotorcraft has been greatly increased. If the fuel system of the
rotorcraft has not been properly designed and constructed, a fuel vapor ignition may
occur if the rotorcraft encounters a lightning strike. This occurrence generally results in
a catastrophe to the rotorcraft. To prevent such a catastrophe and provide a level of
safety equivalent to normal utility, acrobatic and commuter category airplanes, a specific
rule for the lightning protection of normal category rotorcraft fuel systems was adopted
in Amendment 27–23.
b. Explanation.
(1) This regulation requires that the rotorcraft’s fuel system be designed and
constructed so that an ignition of fuel vapor will not occur when the rotorcraft is involved
in a lightning strike. For the purposes of this regulation the fuel system is comprised of
the fuel tank with all its associated plumbing and any other areas of the rotorcraft likely
to have fuel vapor present (such as sumps and drains for the tank itself). Externally
mounted fuel tanks are also considered to be part of the “fuel system.”
(2) Other associated installations such as electrical wiring in the fuel tanks
which could provide a source of ignition due to an indirect or induced effect should also
be considered.
c. Procedures.
(1) The current revision of Advisory Circular 20-53 provides guidance on an
acceptable method and procedure to be utilized to demonstrate that the design and
construction of the fuel system is compliant with § 27.954.
(2) FAA Report No. DOT/FAA/CT-89/22 contains additional information
regarding the lightning environment. Also contained in this report are design and test
techniques which provide for a design that will be adequately protected from fuel vapor
ignition when the rotorcraft encounters the lightning environment. This report is
available to the public by order from the National Technical Information Service,
Springfield, VA 22161.
AC 27.955. § 27.955 FUEL FLOW.
a. Explanation.
(1) Section 27.955 is intended to ensure adequate fuel flow to the engine(s) at
maximum power under the intended aircraft operating conditions and maneuvers.
(2) In showing adequate fuel flow, the rule provides-
(i) That the fuel be supplied within the appropriate engine fuel pressure
range;
Page E - 58
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.