FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page E-11

PDF page 425 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 425
AC 27-1B · E-11Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

9/30/99                                             AC 27-1B

compromise the interconnect mechanism between the main and auxiliary rotors of the
rotorcraft.

     d. § 27.917(d):

         (1) Explanation. This paragraph sets forth a definition of the rotor drive system
and its associated components.

         (2) Procedures. Coordinate with other certification personnel to ensure that
other rules pertaining to rotor drive systems are properly addressed.

AC 27.921.  § 27.921 ROTOR BRAKE.

     a. Background. Rotor brake safety requirements are intended not only to prevent
adverse effects on aircraft performance due to brake drag but also to minimize the
possibility of fire. These fires, caused by friction from a dragging rotor brake, have
occurred both in flight and during ground operation with extremely hazardous
consequences.

     b. General. This rule requires (1) that any limitations on the use of the rotor brake
must be established, and (2) that the control for the brake must be guarded to prevent
inadvertent operation.

      c.  Limitations.

         (1) The limitations on the use of the rotor brake should first be defined by the
applicant and will normally consist of merely the maximum speed eligible for application
of the brake. In some installations, other limitations associated with engine operation
may be specified.

         (2) Control guard mechanisms to prevent inadvertent operation may be
conventional. A cockpit evaluation of the guard should be conducted by flight test
personnel to affirm the function of the guard, that markings, if any, are adequate, and
that both latched and unlatched positions of the guard do not interfere with other cockpit
functions.

     d. Other rules require both generalized and specific rotor brake qualification tests.
However, some significant aspects of brake safety tests are listed below for reference.

         (1) Routine application of the brake at shutdown during the endurance test of
§ 27.923 and during the function and reliability tests of § 21.35.

         (2) Torsional vibration loads in the rotor drive system and oscillatory loads in
the brake components during a critical brake engagement procedure should be
determined with appropriate consideration in the fatigue evaluation for these



                                                       Page E - 11

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →