FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page D-131

PDF page 404 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 404
AC 27-1B · D-131Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/4/2016                                       AC 27-1B, Chg 7


             (D) Any fabric used should be durable and should be at least flame-
resistant.

              (E) Safety harnesses and belts should meet TSO C167 requirements.

              (F) Occupant retention devices and related design safety features should
be used as necessary. In simple designs, rounded corners and edges with adequate
strapping (or other means of HEC retention relative to the PCDS) and head supports or
pads may be all the safety features that are necessary. However, in more complex
PCDS designs, safety features such as seat belts, handholds, shoulder harnesses,
placards, or other personnel safety standards may be required.

            (v) EMI and lightning protection.  All essential, affected components of the
PCDS, such as intercommunication equipment, should be protected against RF field
strengths to a minimum of RTCA Document DO-160 Category Y.

             (vi) Instructions for continued airworthiness. All instructions and documents
necessary for continued airworthiness, normal operations, and emergency operations
should be completed, reviewed, and approved during the certification process. There
should be clear instructions to describe when the PCDS is no longer serviceable and
should be replaced in part or as a whole due to wear, impact damage, fraying of fibers,
other forms of degradation. In addition, any life limitations resulting from compliance
with paragraphs d.(10)(ii) and (iii) should be provided.

              (vii) Flotation devices. PCDSs that are intended to have a dual role as
floatation devices or life preservers should meet the requirements of TSO-C13f, "Life
Preservers." Also, any PCDS design to be used in the water should have a floatation
kit. The kit should support the weight of the maximum number of occupants and the
PCDS in the water and minimize the possibility of the occupants floating face down.

               (viii) Flight testing.  It should be shown by flight tests that the device is safely
controllable and maneuverable during all requested flight regimes without requiring
exceptional piloting skill. The flight tests should entail the PCDS weighted to the most
critical weight. Litters and other types of PCDS designs may spin, twist or otherwise
respond unacceptably in flight. These designs should be structurally restrained with
devices such as a spider, a harness, or an equivalent device to minimize undesirable
flight dynamics.

             (ix) Medical design considerations. The PCDS should be designed to the
maximum practicable extent and placarded to maximize the HECs protection from
medical considerations such as blocked air passages induced by improper body
configuration and excessive loss of body heat during operations. Injured or water
soaked persons may be exposed to high body heat loss from sources such as rotor
wash and the airstream. PCDS occupant safety from transit induced medical
considerations can be greatly increased by proper design.


                                                         Page D - 131

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →