FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page D-120

PDF page 393 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 393
AC 27-1B · D-120Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 7                                                       2/4/2016


                  (2) The RFM or RFMS approved through the certification authority
should not contain references to RLC classes, as this implies the design meets the
operational rules.

              (B) For non-HEC designs, the following limitation should be included
within the RFM or RFMS:

                •  The external load system does not comply with the 14 CFR part 27
                       certification requirements for Human External Cargo (HEC).

             (C) The RFM or RFMS may contain wording to clarify whether the external
load system meets the certification requirements for lifting an external load free of land
or water and whether the load is jettisonable.

             (D) The RFM or RFMS should contain emergency procedures detailing
the steps to be taken by the flight crew during emergencies such as an engine failure,
hoist failure, flight director or autopilot failure, etc.

              (E) The RFM or RFMS normal procedures should explain the required
procedures to conduct a safe external load operation. Such information may include the
methods for attachment and normal release of the external load.

                (ii) HEC installations.

              (A) For HEC installations, the following additional limitations should be
included in the RFM or RFMS.

                  (1) The external load system meets the 14 CFR part 27 certification
requirements for Human External Cargo (HEC).

                  (2) Operation of the external load equipment with HEC requires the
use of a Personnel Carrying Device Systems (PCDS), which must be approved by the
local Aviation Authority. TSO-C167 provides one such acceptable means of approval.

              (B) Crewmember communications.

                  (1) The flight manual should clearly define the method of
communication between the flight crew and the HEC. These instructions and manuals
should be validated during TIA flight testing.

                  (2) If the external load system does not include equipment to allow
direct intercommunication among required crewmembers and external occupants, the
following limitation may be included within the limitations section of the RFM or RFMS:




Page D - 120

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →