FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page D-108

PDF page 381 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 381
AC 27-1B · D-108Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 4                                                     3/31/2014


      c. Methods of Compliance.

         (1) To minimize the probability of ignition of fluids and vapors after single failure
of a component or systems, the following methods may be used:

                  (i)   Shroud and drain flammable fluid systems (including steel fluid lines,
fittings, etc.) and provide the systems with fuel and vapor seals with respect to potential
ignition sources (electrical wiring and equipment, hot bleed air lines, etc.).

                   (ii)   Provide other effective separation, ventilation, or overheat shutdown
devices, etc., to preclude ignition.


               (iv)  Place a restricting orifice in fluid pressure lines routed to instruments
and transducers.

              (v)   Ensure fluid lines are not located so as to be subject to abrasion
during normal operations. Cargo compartments should be evaluated for potential line
damage due to cargo movement.

         (2) To minimize hazards if ignition occurs:

                  (i)    Provide fireproof designs, firewall isolation, or equivalent means for
critical structure, equipment, and personnel areas.

                   (ii)   Consider fire detection, extinguishment, shutoff valves, fire
suppression systems, etc.

         (3) In considering compliance, the actual protective measures may be related
to the situation, considering the quantity and flammability characteristic of the fluid, the
fire damage tolerance of the area, and the means available to the crew to minimize
hazards from the fire.  If action by the crew is necessary, a quick acting means ( not
necessarily fire detectors) must be provided to alert the crew in the event of a fire.
Details of any action required by the crew should be included in the Rotorcraft Flight
Manual.

      (4) Compliance with § 27.863(d) requires, a minimum, type design data
defining each area where flammable fluids or vapors might escape.





Page D - 108

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →