Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
amendment, is to provide protection from a compartment fire to a degree which will
ensure that a controlled autorotational landing can be made during a period of at least
5 minutes after start and detection of a fire. No distinction was made for twin-engine
rotorcraft. A distinction was made between accessible and inaccessible compartments.
(5) It is recommended that tiedown straps or nets, if installed, should be made
of material that is at least flame resistant.
(6) Reference is made to § 27.853 and paragraph AC 27.853 for flammability
standards of certain materials.
b. Procedures.
(1) For a compartment accessible in flight, a flame resistant liner, box, or
closure of the compartment is required. For an inaccessible compartment, a fire
resistant liner, an aluminum inner skin, box, or closure of the compartment is required.
Advisory Circular 23-2, Flammability Tests, provides information about material
flammability tests.
(2) Only fire resistant material may be used in inaccessible compartments.
Carpets and wall coverings may not be used.
(3) Flame resistant materials may be used on floors, walls, and ceilings of
accessible compartments.
(4) Although not specified in the standards, it is recommended that tiedown
nets or straps comply with the self-extinguishing flammability standards of
§ 29.853(a)(3). Cargo compartment blankets or covers should comply with the
flammability standards of § 29.853(a)(2). However, it is acceptable to use tiedown
equipment that meets the flame resistant material standard.
(5) It is recommended that compartments use design features that seal the
compartment and prevent airflow into (or out of) the compartment. The objective is to
limit the air supply to a potential fire.
(6) Controls, wiring, equipment, and accessories should not be routed through,
mounted in, or exposed to the compartment. If these items, as described in
§ 27.855(b), are in the compartment, they should be protected by a cage or rigid
housing adequate to protect the items. To maintain the compartment integrity for fire
containment, it may be necessary to separate these items from the compartment by an
appropriate fire resistant or flame resistant housing or enclosure.
Page D - 100
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.