Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 1 2/12/03
• Multiple or combinations of devices should be used to distribute the
occupant loads as well as protect the occupant from possible neck
and spine compression.
AC 27.785B § 27.785 (Amendment 27-35) SEATS, BERTHS, LITTERS, SAFETY
BELTS, AND HARNESSES.
a. Explanation. Amendment 27-35 revised the title of the rule to now include
litters to distinguish from berths. Additionally, § 27.785(k) was revised to require that
the 1.33 fitting factor of § 27.625(d) must be applied to the emergency landing loads of
§ 27.561(b)(3) for the substantiation of attachments of each berth and litter to the
structure.
b. Procedures. All of the advisory material pertaining to this section remains in
effect with the following additions:
(1) A fitting factor of 1.33 must be applied to the emergency landing loads of
§ 27.561(b) when evaluating the berth or litter attachment and the occupant restraint
system to the structure.
(2) The 1.33 factor is required whether analysis or test is used.
AC 27.787. § 27.787 (Amendment 27-11) CARGO AND BAGGAGE
COMPARTMENTS.
a. Explanation.
(1) This standard concerns the strength or structural integrity of either a cargo
or baggage compartment. For purposes of this paragraph, baggage and cargo
compartments are synonymous. Other design standards are also included.
(2) Fire protection standards of these compartments are contained in § 27.855,
paragraph AC 27.855.
(3) The compartment must contain the maximum (design) weight cargo for
maximum landing and flight load factors. The minor crash conditions noted in § 27.561
are not applied to cargo compartments. However, a forward ultimate load factor of 4 is
applied to the contents of cargo compartments. This forward load condition is related to
occupant protection. Compartments forward of the occupant’s compartment may be
designed to the appropriate landing load factor (landing with drag and side load).
(4) Features such as straps, nets, ropes, and possibly other means of restraint
may be used when necessary to prevent hazardous shifting of cargo as prescribed
under flight and landing loads.
Page D - 80
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.