Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
9/30/99 AC 27-1B
(i) Collective control blocking the lateral movement of a pilot’s leg, which
in turn restricts the left lateral cyclic displacement.
(ii) Seat or seat cushion impeding the aft cyclic movement.
(iii) Inadequate space for large feet equipped with large flight boots.
(iv) Control/seat relationship which requires unusual pilot contortions at
extreme control displacements.
(v) Control/seat relationship or control system geometry which will not
permit adequate mechanical advantage with unboosted controls or in a boost OFF
situation.
(vi) Addition of control panels or equipment to instrument panels or
consoles which restrict full control throw.
(vii) Brake pedal geometry which results in inadvertent brake application
upon displacement of the directional controls.
(viii) Controls for accessories or equipment which require a two-handed
operation.
(ix) Emergency external cargo release controls which cannot be activated
without releasing the primary flight controls.
(x) Essential controls which cannot be actuated during emergency
conditions with the shoulder harness locked.
(xi) Throttle controls which can be inadvertently moved through idle to the
cutoff position.
(xii) Switches, buttons, or other controls which can be inadvertently
activated during routine cockpit activity including cockpit entry.
(xiii) Failure to account for operation with the pilot wearing bulky winter
clothing.
(xiv) Aft cyclic movement limited by the pilot’s body with a fore and aft
adjustable seat in the full forward position.
AC 27.779. § 27.779 (Amendment 27-21) MOTION AND EFFECT OF COCKPIT
CONTROLS.
a. Explanation. The section standardizes motion and effect of cockpit controls.
While this paragraph specifically addresses primary flight controls, engine power
Page D - 69
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.