Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 2 4/25/06
AC 27.775 § 27.775 WINDSHIELDS AND WINDOWS.
a. Explanation. The use of nonsplintering safety glass is specified when glass is
used in windshields and windows to protect crew and passengers in the event that
window fracturing occurs.
b. Procedures. Use nonsplintering safety glass in windshield or window
applications which contain glass rather than plastic acrylics, polycarbonates, epoxies,
etc. The glass selected should meet a specification such as MIL-G-25871, and if new
vendors are selected by an airframe manufacturer, test data should be obtained from
the vendor to demonstrate the safety glass provided meets an acceptable specification
and provides adequate nonsplintering capability.
AC 27.775A § 27.775 (Amendment 27-27) WINDSHIELDS AND WINDOWS.
a. Explanation. Amendment 27-27 changed § 27.775 to allow the use of
materials other than nonsplintering safety glass; i.e., plastics are allowed. Additionally,
whatever material is used should not break into dangerous fragments upon impact.
b. Procedures. The procedures contained in paragraph AC 27.775 apply equally
to glass or plastics.
AC 27.777 § 27.777 COCKPIT CONTROLS.
a. Explanation. This section defines the general cockpit control requirements.
Cockpit control location and arrangement with respect to the pilot’s seat must be
designed to accommodate pilots from 5’2” to 6’0” in height. Pilots within this range
should be able to reach and operate all required controls and have sufficient clearance
with the structure, panels, etc.
b. Procedures.
(1) The applicant should have a cockpit design report which documents the
anthropometric suitability of the cockpit. Subsequent cockpit evaluations of control
movement and location should be conducted with adjustable seats and/or controls
positioned in a flight position for the subject pilot. Essential controls should be
evaluated with the shoulder harness locked in the retracted position. Evaluation pilots
should be aware of their individual anthropometric measurements and temper their
assessments based on this information. Ideally, a new design should include
evaluations by a range of different sized subject pilots. Control considerations for a
second pilot position are the same as for the pilot station. Paragraph AC 27.771
discusses current philosophy concerning duplication of controls.
(2) As background, the following are examples of cockpit control issues which
should be avoided:
Page D - 68
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.