Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
determined and recorded. Only the least or minimal clearance found, if adequate,
should be recorded in the type inspection report or other appropriate type design report.
(4) The Tire and Rim Association, Inc., generally issues a yearbook listing tire
and wheel rim sizes and ratings. This information is advisory as stated in the yearbook.
Section 9 concerns aircraft tires and rims. Table AP-5 in Section 9 of the yearbook
concerns tires used on rotorcraft. The tire may be selected initially from the yearbook,
but qualification data for the specific tires used shall be furnished with the type design
data in compliance with the standards. Section 9 also contains tire size and tire growth
dimensions.
(5) Aircraft Tires. Minimum performance standards for aircraft tires, excluding
tail wheel tires are found in TSO-C62, Aircraft Tires. Tires meeting TSO-C62 are
marked as prescribed in the standards. The load rating (reference § 27.733) is marked
on the tire. TSO tires are not required but should be used whenever possible. The
manufacturer’s information, such as load rating, should be included in the aircraft type
design structural substantiation data.
AC 27.735. § 27.735 (Amendment 27-21) BRAKES.
a. Explanation.
(1) Brakes are required for wheel landing gear aircraft. Minimum performance
standards are contained in this section. During the course of the FAA/AUTHORITY
flight test program and of any F&R program conducted under § 21.35, the brakes shall
be used and evaluated.
(2) Design criteria are contained in this standard.
(i) The braking device must be controllable by the pilot. It is optional for
the second pilot station except as may be specified under the provisions of § 27.771.
(ii) The braking device must be usable during power-off landings.
(3) Performance criteria are also contained in this standard.
(i) The brakes must be adequate to counteract any normal unbalanced
torque when starting or stopping the rotor or rotors.
(ii) The brakes must be adequate to hold the rotorcraft parked on a 10°
slope on dry, smooth pavement.
(4) In §§ 27.493(b)(2) and 27.497(g)(2)(ii), limiting brake torque is one ground
load standard for design of the landing gear.
Page D - 56
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.