Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
9/30/1999 AC 27-1B
(10) Section 27.1309 Equipment, systems, and installations.
b. Explanation.
(1) The rule requires an alternate system if a power boost or power-operated
control system is used.
(2) The alternate system must, in the event of any single failure in the power
portion of the system, or in the event of failure of all engines:
(i) Be immediately available.
(ii) Allow continued safe flight and landing.
(3) The alternate system may be:
(i) A duplicate power portion of the system; or
(ii) A manually operated mechanical system.
(4) The power portion of the system includes:
(i) The power source (such as hydraulic pumps); and
(ii) Items such as valves, lines, and actuator.
(5) The failure of mechanical parts (such as piston rods and links) must be
considered unless their failure is extremely improbable.
(6) The jamming of power cylinders must be considered unless their jamming is
considered extremely improbable.
c. Procedures. It is assumed in the following discussion that the power boost or
power-operated control system being utilized is a typical aircraft hydraulic system.
(1) The rule requires, without respect to the probability of failure, an alternate
system for the power portion of the system. The power portion of the system, by
example in the rule, includes hydraulic pumps, valves, lines, and actuators. It has also
been interpreted to include seals, servo valves, and fittings.
(2) If a duplicate power portion of the system is used to meet the requirements
of the rule, the requirements may be met by providing a dual independent hydraulic
system, including the reservoirs, hydraulic pumps, regulators, connecting tubing, hoses,
servo valves, servo-valve cylinder, and power actuator housings. There must be no
Page D - 45
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.