Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
9/30/99 AC 27-1B
AC 27.687. § 27.687 SPRING DEVICES.
a. Explanation.
(1) This standard for control systems ensures that springs and spring devices
used to prevent flutter, control oscillations, or vibrations are either -
(i) Reliable (failure is extremely remote); or
(ii) The failure is not critical to the rotorcraft.
(2) Tests simulating service conditions are required in either instance.
b. Procedures.
(1) Springs and spring devices used in the control system, including balance
springs, should be identified early in the certification program.
(2) Whenever a spring cannot be proven by observation or analysis that it is
“not critical,” then ground or flight tests may be required.
(3) Springs that are critical to safe operation may be subject to fatigue
substantiation to prove they are reliable for the operating conditions imposed in service.
(4) Springs used in conjunction with hydraulic actuator spool valves may be
subject to the standards of § 27.695.
AC 27.691. § 27.691 AUTOROTATION CONTROL MECHANISM.
a. Explanation.
(1) Rotorcraft designs generally have a main rotor blade collective pitch control
system that does not have detents or other devices to limit pitch control in the control
midrange. Autogyro and other rotorcraft designs may include detents or other finite
position control for collective pitch control. This rule requires that the control design
allows rapid entry into autorotation after a power failure.
(2) Section 27.33 contains standards concerning establishment and control of
the main rotor speed limits. The standard requires flight tests and demonstrations. The
standard also concerns rotorcraft design features that are related to control of the main
rotor speed limits.
(3) Other design requirements for control systems are contained in § 27.685.
b. Procedures.
Page D - 43
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.