Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
4/25/06 AC 27-1B, Chg 2
(1) All critical parts of the rotorcraft are identified by means of an
appropriate failure assessment and a Critical Parts List is established.
(2) Documentation draws the attention of the personnel involved in the design,
manufacture, maintenance, inspection, and overhaul of a critical part to the special
nature of the part and details the relevant special instructions. For example all
drawings, work sheets, inspection documents, etc., could be prominently annotated with
the words "Critical Part" or equivalent and the Instructions for Continued Airworthiness
and Overhaul Manuals (if applicable) should clearly identify critical parts and include the
needed maintenance and overhaul instructions. The documentation should:
(i) Contain comprehensive instructions for the maintenance, inspection and
overhaul of critical parts and emphasize the importance of these special procedures;
(ii) Indicate to operators and overhaulers that unauthorized repairs or
modifications to critical parts may have hazardous consequences;
(iii) Emphasize the need for careful handling and protection against
damage or corrosion during maintenance, overhaul, storage, and transportation and
accurate recording and control of service life (if applicable);
(iv) Require notification of the manufacturer of any unusual wear or
deterioration of critical parts and the return of affected parts for investigation when
appropriate;
(3) Procedures should be established for identifying and controlling critical
characteristics.
(4) To the extent needed for control of critical characteristics, procedures and
processes for manufacturing critical parts (including test articles) are defined (for
example material source, forging procedures, machining operations and sequence,
inspection techniques, and acceptance and rejection criteria). Procedures for changing
these manufacturing procedures should also be established.
(5) Any changes to the manufacturing procedures, to the design of a critical
part, to the approved operating environment, or to the design loading spectrum are
evaluated to establish the effects, if any, on the fatigue evaluation of the part.
(6) Materials review procedures for critical parts (i.e., procedures for
determining the disposition of parts having manufacturing errors or material flaws) are in
accordance with paragraphs (4) and (5) above.
(7) Critical parts are identified as required, and relevant records relating to the
identification are maintained such that it is possible to establish the manufacturing
history of the individual parts or batches of parts.
Page D - 3
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.