FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page D-2

PDF page 273 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 273
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 2                                                           4/25/06


         (8) The critical characteristics of critical parts produced in whole or in part by
suppliers are maintained.

AC 27.603.  § 27.603 (Amendment 27-16) MATERIALS.

     a. Explanation. The rule requires that the suitability and durability of materials,
the failure of which could adversely affect safety, must be determined by three-fold
considerations:

         (1) Considerations based on experience or tests.

         (2) By meeting approved specifications.

         (3) By taking into account environmental conditions such as temperature and
humidity.

     b. Procedures.

         (1) Where possible, materials that meet widely accepted specifications such as
AISI, SAE, MIL, or AMS and alloys which have favorable experience or tests should be
used. Where company developed materials are used, approved specifications are
required to ensure the developed properties are duplicated in each lot of material.

         (2) Environmental conditions may be taken into account by service experience,
coupon testing, full-scale testing, or a combination of testing and experience,
MIL-HDBK’s -5, -17, and -23 include some environmental effects and contain reference
to additional methods of testing for environmental effects.

         (3) Section 27.613 concerns strength properties and design values. (See
paragraph AC 27.613.)

AC 27.605.  § 27.605 (Amendment 27-16) FABRICATION METHODS.

     a. Explanation. The basic requirement of this rule is that the methods of
fabrication must produce sound structure and produce it consistently.

         (1) A process specification is required for fabrication processes requiring close
control.

         (2) A test program is explicitly required for each new aircraft fabrication method.

     b. Procedures.




Page D - 2

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →