FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page C-97

PDF page 247 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 247
AC 27-1B · C-97Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

12/1/2011                                       AC 27-1B, Chg 4


should be designed with appropriate checks and balances, so that the necessary
statistical reliability and confidence levels for the items being inspected (that are
specified by engineering) are continuously maintained. This will require periodic
standard inspections and engineering characterization tests on basic constituent and
material system samples, which should be conducted, as a minimum, on a
batch-to-batch basis. The periodic testing necessary to maintain the quality standard
should be conducted by the applicants on conformed samples and should be FAA
witnessed.

     (C) Material System Component Storage and Handling. Applicants should be able
to demonstrate to FAA certification team members (both MIDO and engineering), at any
time, that their composite material system (or constituent) storage and handling
procedures and specifications provide products, which continuously meet approved
material and process specifications. Quality systems should be designed with
appropriate checks and balances, so that the necessary statistical reliability and
confidence levels for the items being inspected (that are specified by engineering) are
continuously maintained. This should require, as a minimum, periodic inspections to
ensure that proper records are kept on critical parameters (e.g., room temperature
“bench” exposure, shelf life) and that periodic basic constituent and material system
characterization tests are conducted, on a batch-to-batch basis. The periodic testing
necessary to maintain the quality standard should be conducted by the applicants on
conformed samples and should be FAA witnessed.

     (D) Statistical Validation Level.  It is necessary to maintain the minimum required
statistical validation level of the quality control system, which should be specified for
each critical item or constituent by the approved quality and engineering specifications.
The statistical validation level should be defined and approved early in certification.
Also, approval and proper usage should be continuously maintained during the entire
procurement and manufacturing cycles.

      (v) Alternate fabrication and process specifications should be approved and must
comply with § 27.605. Any alternate specifications should provide at least the same
level of quality and safety as the original specification. Any changes should be
presented for FAA approval well in advance of the effective date of the production
change.

      (2) The second area is the basic raw constituent, pre-preg and laminate material
acceptance requirements, and material property determination requirements of
§§ 27.603 and 27.613. These criteria require application of the critical environmental
limits such as temperature, humidity, and exposure to aircraft fluids (such as fuel, oils,
and hydraulic fluids), to determine their effect on the performance of each composite
material system. Temperature and humidity effects are commonly considered by
coupon and component tests utilizing preconditioned test specimens for each material
system selected. Material “A” and “B” basis allowable strength values and other basic
material properties (based on CMH-17 or equivalent procedures) are typically
determined by small scale tests, such as coupon tests, for use in certification work. In


                                                          Page C - 97

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →