FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page C-95

PDF page 245 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 245
AC 27-1B · C-95Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

12/1/2011                                       AC 27-1B, Chg 4


     Document             Title
     FAA Order 8110.9    Handbook on Vibration Substantiation and Fatigue
                            Evaluation of Helicopter and other Power
                           Transmission Systems
    AC 27-1B, MG 11     “Fatigue Evaluation of Rotorcraft Structure”
    AC 20-107           “Composite Aircraft Structure”
    AC 21-26              “Quality Control for the Manufacture of Composite
                              Materials”
    CMH -17            “Composite Materials Handbook”
    AC 29-2C, MG 11     “Fatigue Tolerance Evaluation of Transport Category
                              Rotorcraft Metallic Structure”
     DOT/FAA/CT-86/39   Whitehead, R.S., Kan, H.P., Cordero, R., and
                            Seather, R., “Certification Testing Methodology for
                         Composite Structures”, October 1986.

    f. Procedures for Substantiation of Rotorcraft Composite Structure. The composite
structures evaluation has been divided into eight basic regulatory areas to provide focus
on relevant regulatory requirements. These eight areas are: fabrication requirements;
basic constituent, pre-preg and laminate material acceptance requirements, and
material property determination requirements; protection of structure; lightning
protection; static strength evaluation; damage tolerance and fatigue evaluation; dynamic
loading and response evaluation; and special repair and continued airworthiness
requirements. Original as well as alternate or substitute material system constituents
(e.g., fibers, resins), material systems (combinations of constituents and adhesives),
and composite designs (e.g., laminates, cocured assemblies, bonded assemblies)
should be qualified in accordance with the methodology presented in the following
paragraphs. Each regulatory area will be addressed in turn.  It is important to
remember that proper certification of a composite structure is an incremental, building
block process, which involves phased FAA/AUTHORITY involvement and incremental
approval in each of the various areas outlined herein.  It is recommended that a
FAA/AUTHORITY certification team approach be used for composite structural
substantiation. The team should consist of FAA/AUTHORITY and cognizant members
of the applicant’s organization. Personnel who are composites specialists (or are
otherwise knowledgeable in the subject) should be primary team member candidates.
Once selected, it is recommended that team meetings be held periodically (possibly in
conjunction with type boards) during certification to ensure the building block
certification process is accomplished as intended. The team should assure that
permanent documentation in the form of reports or other FAA/AUTHORITY acceptable
documents are included in the certification data package. The documentation includes
but is not limited to the structural substantiation reports (both analysis and test),
manufacturing processes and quality control, and Instructions for Continued
Airworthiness (maintenance, overhaul, and repair manuals). The Airworthiness
Limitations Section of the Instructions for Continued Airworthiness is approved by FAA
engineering. Engineering practices for many of the areas identified below are available
in CMH-17.


                                                          Page C - 95

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →