Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Extracted text for finding words
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 4 12/1/2011
(22) Disbond. A lack of proper adhesion in a bonded joint. This may be isolated
or may cover a majority of the bond area. It may occur at any time in the cure or
subsequent life of the bond area and may arise from a wide variety of causes.
(23) Element. A generic part of a more complex structural member (e.g., skin,
stringers, shear panels, sandwich panels, joints, or splices).
(24) Environment. External, non-accidental conditions (excluding mechanical
loading), separately or in combination, that can be expected in service and which may
affect the structure (e.g., temperature, moisture, UV radiation, and fuel).
(25) Fatigue or Environmental Damage. Structural damage related to fatigue or
environmental effects such as delaminations, disbonds, splintering, or cracking.
(25) Fiber. A single homogeneous strand of material, essentially one-dimensional
in the macro-behavior sense, used as a principal constituent in advanced composites
because of its high axial strength and modulus.
(26) Fiber Volume. The volume of fiber present in the composite. This is usually
expressed as a percentage volume fraction or weight fraction of the composite.
(28) Fill. The 90° yarns in a fabric, also called the woof or weft.
(29) Glass Transition. The reversible change in an amorphous polymer or in
amorphous regions of a partially crystalline polymer from (or to) a viscous or rubbery
condition to (or from) a hard and relatively brittle one.
(30) Glass Transition Temperature. The approximate midpoint of the temperature
range over which the glass transition takes place.
(31) Hybrid. Any mixture of fiber types (e.g., graphite and glass).
(32) Impregnate. An application of resin onto fibers or fabrics by several
processes: hot melt, solution coat, or hand lay-up.
(33) Intrinsic or discrete manufacturing defects. Intrinsic or discrete imperfections
or flaws related to manufacturing operations, processing or assembly, such as voids,
gaps, porosity, inclusions, fiber dislocation, disbonds, and delaminations.
(34) Lamina. A single ply or layer in a laminate in which all fibers have the same
fiber orientation.
(35) Laminate. A product made by bonding together two or more layers or
laminae of material or materials.
(36) Low Strain Level. As used herein, is defined as a principal, elastic axial gross
strain level that for a given composite structure provides for no flaw growth and thus
Page C - 92