Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 4 3/31/2014
AC 27.562§ 27.562 (Amendment 27-25) EMERGENCY LANDING DYNAMIC
CONDITIONS.
a. Explanation. Amendment 27-25 adds new requirements for the dynamic
testing of all seats in rotorcraft. This paragraph is rewritten to incorporate the guidance
previously documented in AC 20-137 dated 3/30/92.
b. Background. Improved occupant restraint in civil rotorcraft is addressed in
Amendments 27-25 to the airworthiness standards, which add two dynamic crash
impact design conditions for seat and occupant restraint systems. This amendment
also prescribes a shoulder harness for each occupant and adopts human impact injury
criteria as a measure for occupant protection for the dynamic crash impact conditions.
In addition, these amendments significantly improve occupant protection for normal
category rotorcraft in a survivable emergency landing. This advisory material addresses
the dynamic test conditions and the related pass-fail injury criteria for the dynamic test
conditions. This material pertains to single as well as multiple seats and tandem
arrangements of the seats in rotorcraft.
(1) Dynamic test methods. This guidance focuses on the use of dynamic test
methods for evaluating the performance of rotorcraft seats, restraint systems, and
certain related interior systems for demonstrating structural strength and the ability of
those systems to protect an occupant from possible injuries in an emergency landing
environment represented by the standard. These test methods differ from static test
methods, which are limited to demonstrating only the structural strength of the seat or
restraint system under ultimate load for at least 3 seconds. This guidance contains
sources for appropriate test procedures and provides some insight into the logic of
these procedures. It also defines, in part, test facility and equipment characteristics
necessary for conducting these tests.
(2) Standardized test methods. Dynamic tests are often conducted at a
specially equipped facility, one other than that owned by the designer or manufacturer
of the test article. To obtain consistent test results, it is necessary to specify the critical
test procedures in detail in the test plan, and then carefully follow these procedures
when conducting the tests. This guidance defines certain critical procedures for
accomplishing the tests of the seat and restraint systems and assessing the data
obtained in the tests. Many of these procedures are accepted as standards by
government and commercial test facilities and have been modified in this guidance only
as necessary for the specific testing of rotorcraft systems.
(3) Relationship of dynamic tests to design standards. This guidance describes
test procedures useful in assessing the performance of a rotorcraft seat, restraint
system, and interior system. However, it is impractical to conduct sufficient tests for
assessing the performance of the system throughout its entire range of possible uses in
Page C - 44
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.