FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page C-41

PDF page 191 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 191
AC 27-1B · C-41Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

3/31/2014                                      AC 27-1B, Chg 4


      (3) The ultimate design landing and maneuvering load factors may exceed the
minor crash condition load factors. The highest load factor derived shall be used.

            (i) For example, for light weight conditions, the ultimate maneuvering load factor
may be 5.25g as specified in § 27.337.

             (ii) The ultimate vertical landing load factors derived from §§ 27.471 through
27.521, whichever is appropriate for the design, may exceed the 4.0g down load factor
in this section. The rotorcraft landing case design limit contact velocity shall range from
6.5 to 8.3 FPS (see §§ 27.473 and 27.725).

      (4) As specified in (b)(3)(iv) of the standard, the downward load factor is 4.0 or a
lower design load factor may be used.

            (i) The lower load factor relates to a rotorcraft impacting a flat, hard landing
surface at 5 FPS (ultimate) vertical rate of descent. The load factor derived for each
unique design is a function of the aircraft impact and crushing characteristics.

             (ii) The 4.0g down load factor case is related to either a fixed or retractable gear
rotorcraft. This condition is not dependent on impact characteristics of the rotorcraft.

              (iii) As noted in paragraph b.(3) above, the design landing load factors may
exceed each of the two previous cases and would then become the prominent design
(vertical load) parameter for seats, transmissions, fire extinguishers, etc.

      (5) Items of mass such as fire extinguishers, nav-com equipment, life rafts,
engines, and transmissions shall be restrained for the appropriate load factors.

      (6) Cargo or baggage compartments separated from the passenger compartment
shall be designed for load factors specified in § 27.787. The conditions in § 27.561 are
excepted from that standard.

AC 27.561A.  § 27.561 (Amendment 27-25) EMERGENCY LANDING
           CONDITIONS - GENERAL.

   a. Explanation. Amendment 27-25 adds or increases the design static load factor of
§ 27.561 in two areas. The addition of these load factors eliminates the 5 FPS ultimate
descent velocity criteria of unamended § 27.561(b)(3).

      (1) The design static load factors for the cabin in § 27.561(b)(3) are increased in
concert with the dynamic test requirements of new § 27.562.

      (2) Design static load factors are added in § 27.561(c) for external items of mass
located above or behind the crew and passenger compartment.



                                                          Page C - 41

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →