FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page C-34

PDF page 184 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 184
AC 27-1B · C-34Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B                                                                  9/30/99


         (8) Since the rotorcraft is to be designed for load factors that will not be
exceeded during taxi tests or other conditions, an instrumented taxi test program will be
necessary. (Use § 27.235, paragraph AC 27.235.)

AC 27.501  § 27.501 (Amendment 27-2) GROUND LOADING CONDITIONS:
         LANDING GEAR WITH SKIDS.

     a. Explanation. This section provides the ground loading conditions for landing
gear with skids. The loading conditions are similar to those for wheeled gear except for
the following criteria which are unique to skid gears:

         (1) Structural yielding of elastic spring members under limit loads is allowed.

         (2) Design ultimate loads for elastic spring members need not exceed the loads
obtained in a drop test with a drop height of 1.5 times the limit drop height. The
rotorcraft and the landing gear attachments are subject to the prescribed design
ultimate loads.

         (3) The gear must be in its most critically deflected position (similar to
§ 27.475).

         (4) Ground reactions are rationally distributed along the bottom of the skid
unless otherwise specified. Section 27.501(f) concerns specific “concentrated” and
arbitrary load conditions.

         (5) Drag loads are 50 percent of vertical reactions rather than the 25 percent for
wheeled gear.

         (6) Side loads are 25 percent of the total vertical reaction rather than the
60 to 80 percent for wheeled gear.

         (7) Side loads are applied to one skid only (inward acting and outward acting)
with resulting unbalanced moment resisted by angular acceleration.

         (8) A ground reaction load of 1.33 times the maximum weight is to be applied at
45° from the horizontal axis:

                  (i)    Distributed among or between the skids;

                   (ii)   Concentrated at the forward end of the straight portion of the skid
tube; and

                    (iii)   Applied only to the forward end of the skid tube and its attachment to
the rotorcraft.



Page C - 34

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →