Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
(2) Application of loads-
(i) Maximum design vertical loads applied alone; and
(ii) The maximum design vertical loads applied with a drag load of at least
25 percent of the vertical load (applied at the ground contact area).
(3) A 40 percent/60 percent load distribution between wheels for configurations
having two forward wheels including quadricycle. This distribution between wheels on a
common axis is to be applied for the conditions of vertical loads only and for vertical
loads combined with drag loads of 25 percent of the vertical loads.
(4) Aircraft pitching moments are to be reacted by the forward landing gear for
simultaneous wheel contact or by the angular inertia forces when the forward landing
gear is clear of the ground as specified.
b. Procedures.
(1) The specified loading conditions will be used in load derivations.
(2) The critical center of gravity condition will be used for each gear and gear
support structure.
(i) The aft center of gravity condition with the forward gear clear will
normally be critical for the aft gear and gear supports.
(ii) The forward center of gravity condition with each gear contacting the
ground simultaneously will normally design forward gear elements critical for vertical
loads.
(iii) The forward center of gravity condition with the forward gear clear
may result in high load factors, angular plus linear, that will greatly affect security of
items of significant mass.
AC 27.481 § 27.481 TAIL-DOWN LANDING CONDITIONS.
a. Explanation. This section provides the criteria for tail-down landing conditions;
i.e., “the maximum nose-up attitude allowing ground clearance” with ground loads acting
“perpendicular to the ground.”
b. Procedures.
(1) The tail-down landing condition will be used to check (by analysis or test) for
criticality of landing gear or support structure. This attitude generally creates the
highest forward loads on the main landing gear in combination with vertical loads.
Page C - 30
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.