FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page C-29

PDF page 179 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 179
AC 27-1B · C-29Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

9/30/99                                             AC 27-1B

     b. Procedures. Loads for the landing conditions are derived considering mass
(equal to the maximum weight) and rotor lift (equal to two-thirds of the maximum weight)
acting through the center of gravity throughout the landing impact. Unbalanced external
loads resulting from asymmetric loading conditions are reacted as specified in the
individual subparagraphs. The rotorcraft must be substantiated for ultimate landing
loads by either test or analysis utilizing an ultimate load factor of 1.5 applied to the limit
load factor of not less than that substantiated under § 27.725.

AC 27.475  § 27.475 TIRES AND SHOCK ABSORBERS.

     a. Explanation. This section specifies the tire and shock absorber position to be
used in ground load derivations.

     b. Procedures. Ground loads are to be derived with the tires in static (1g) position
and the shock absorbers “in their most critical position.” The determination of the “most
critical position” for the shock absorbers generally requires a load versus deflection test
or analysis of the shock absorber system and a determination of the effect of both load
and deflections on the shock absorber, attachment structure, and substructure designed
by ground loads.

AC 27.477  § 27.477 LANDING GEAR ARRANGEMENT.

     a. Explanation. This section specifies the individual standards to be used for
ground load conditions for rotorcraft having two wheels aft and one or more wheels
forward of the center of gravity.

NOTE: Section 27.497 gives ground loading conditions for landing gear with tail
wheels, and § 27.501 gives ground loading conditions for landing gear with skids.

     b. Procedures. The ground loading conditions of §§ 27.235, 27.479 through
27.485, and 27.493 will be used for rotorcraft having two wheels aft and one or more
wheels forward of the center of gravity. This includes forward wheels on separate
axles.

AC 27.479  § 27.479 LEVEL LANDING CONDITIONS.

     a. Explanation. This section provides explicit level landing load criteria for landing
gear with two wheels aft and one or more wheels forward of the center of gravity.

         (1) Level landings-­

                  (i)   Each wheel contacting the ground simultaneously; and

                   (ii)    Aft wheels contacting the ground with forward wheels just clear of the
ground.



                                                          Page C - 29

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →