FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page B-68

PDF page 147 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 147
AC 27-1B · B-68Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B                                                                  9/30/99

                     SUBPART B - FLIGHT

              MISCELLANEOUS FLIGHT REQUIREMENTS


AC 27.251.  § 27.251 VIBRATION.

     a. Explanation.

         (1) Each part of the rotorcraft must be free from excessive vibration under each
appropriate speed and power condition (rule statement).

         (2) This flight requirement may be both a qualitative and quantitative flight
evaluation. Section 27.571(a) contains the flight load survey requirement that results in
accumulation of vibration quantitative data. Section 27.629 generally requires
quantitative data to show freedom from flutter for each part of the rotorcraft including
control or stabilizing surfaces and rotors.

         (3) Review Case No. 70 (reference FAA Order 8110.6) contains a policy
statement concerning compliance with this rule. This policy statement is condensed
here for convenience:

          “The rotorcraft must be capable of attaining a 30° bank angle (turn), at VNE,
with maximum continuous power (maximum continuous torque) without encountering
excessive roughness/vibration. The FAA/AUTHORITY requires the maneuver
demonstration to provide the pilot with some maneuver capability at VNE and further to
provide the pilot some margin away from roughness when operating in turbulence.”
(This maneuver may result in a descent or a climb.)

         (4) Section 27.1505 pertains to VNE determination. Section 27.1509 pertains to
rotor speed limits determination.

     b. Procedures.

         (1) During the company flight test program, the rotorcraft is flown to the
appropriate rotor and airspeed limits at several weights to prove that the rotorcraft is
free from excessive vibration under appropriate speed, power, and weight conditions.
The flight loads survey quantitative data (reference § 27.571) and the applicant’s
qualitative and quantitative flight test data must also prove compliance with the
requirement prior to issuing an authorization for official FAA/AUTHORITY flight tests.

         (2) The flight load survey data obtained under § 27.571(a) will contain
measured data concerning proof of freedom from flutter and excessive vibration.
Pertinent critical flight conditions will be reinvestigated during FAA/AUTHORITY flight
tests. The specific condition or conditions necessary to demonstrate compliance with
§ 27.251 vary with the rotorcraft design and with the minimum and maximum rotor


Page B - 68

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →