FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page B-64

PDF page 143 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 143
AC 27-1B · B-64Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B                                                                  9/30/99

requirements for ground resonance prevention means. A ground vibration survey was
not reinstituted by the adoption of § 27.663. Compliance with § 27.663 does require
investigation and substantiation as stated.

         (2) “Ground resonance” is a mechanical instability of the aircraft while in
contact with the ground, often when partially airborne. Stated another way “ground
resonance” is a self-excited mechanical instability that involves coupling between the
in-plane motion of the rotor blade and the motion of the rotorcraft as a whole on its
landing gear (reference “Aerodynamic of the Helicopter,” Gessow & Myers, page 308).
It is caused by the motion of the blade in the plane of rotation (called in-plane vibration)
coupled with a rocking or vertical motion of the aircraft as a whole. The tires, landing
gear, and rotor pylon restraint structure act as a spring with a vibration frequency which
coincides or couples with the natural in-plane frequency of the blade about a real or
effective drag hinge in the plane of rotation. When the frequencies of the two motions
(rotor and airframe) approach each other and couple, a violent shaking of the rotorcraft
may occur which, if undamped, could result in the destruction of the rotorcraft.

         (3) Ground resonance can occur due to flexibility in the rotor pylon restraint
system as well as with landing gear flexibilities. This mode of vibration or resonance
can happen in flight (called air resonance) as well as on the ground and should be
addressed in the certification program. The evaluation should include variations in
stiffness and damping that could occur in service to the rotor pylon restraints.

         (4) Ground resonance may be prevented by placing the first order in-plane
vibration frequency above the rotor turning speed.

         (5) For such configurations which are not susceptible to ground resonance (first
order in-plane frequency above rotor turning speed), a simple rotor RPM run-up and
run-down with appropriate cyclic control displacement (i.e., excitation of any inherent
vibrations) is adequate demonstration that a ground resonance condition does not exist.
Unhinged “rigid” rotors, such as Bell Helicopter two-blade designs, are this type of rotor
system.

         (6) For configurations that are susceptible to ground resonance (i.e., first
in-plane frequency is below the rotor turning speed), ground resonance is generally
prevented by dampers on the blade acting in the plane of rotation, dampers on the
landing gear (sometimes serving as oleo struts), or proper placement of the landing
gear frequencies combined with rotor and/or landing gear dampers.

         (7) Elastomeric components (in the rotor pylon support system, possibly in the
landing gear, and possibly in the rotor head) are significantly affected by ambient
temperature prior to warm-up. Their damping characteristics require thorough
investigation for the range of rotorcraft operating environment as noted in § 27.663.

     b. Procedures.



Page B - 64

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →