FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page Apdx A-51

PDF page 1154 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1154
AC 27-1B · Apdx A-51Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

4/25/06                                          AC 27-1B, Chg 2

                                      (MANUAL IDENTIFICATION)

                    REQUIREMENTS (continued)

   d. The information is normally contained in the chapters that require the treatment.

23. STRUCTURAL FASTENERS

Information relative to structural fasteners such as identification of structural fasteners,
structural fasteners discard recommendations, and torque values. Reference Appendix A,
A27.3 (f). This is required when structural fasteners are used and torque values are required.

   a. The ICA should identify all structural fasteners i.e. rivets, screws, bolts or others.

   b. The ICA should specify the requirements for discarding structural fasteners

   c. When a structural fastener is required to be torqued, the ICA should contain those specific
torques and the procedure to torque the structural fastener.

   d. Torque values must be specific and in United States or Metric Standards .

   e. The information is normally contained in the chapters specifying structural fasteners and
torque values.

24. SPECIAL TOOLS

A List of Special Tools. Reference Appendix A, A27.3 (g). This is required when special tools
or equipment are specified in the chapters of the ICA.

   a. When a procedure in the ICA requires the use of a special tool(s) that tool should be listed
in the List of Special Tools.

   b. The List of Special Tools is normally contained in the Introduction.





REVISION:                                         (PAGE NUMBER)
Revision 4                                                                              (  )-00-00 Page 9


                                                                  Page Apdx A - 51

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →