Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 1 2/12/03
(MANUAL IDENTIFICATION)
REQUIREMENTS (continued)
19. GENERAL PROCEDURAL INSTRUCTIONS – CHECKS
General procedural instructions including procedures for symmetry checks. Reference
Appendix A, A27.3 (b)(4). This is required when applicant specifies that symmetry checks are
required. The information is normally contained in the chapters addressing the symmetry
checks, or applicant may have a section for special inspections, tests, and checks.
20. STORAGE LIMITATIONS
Storage Limitations. Reference Appendix A, A27.3 (b)(3). This is required when the
rotorcraft, engine, appliance manufacturer, or consumable materials manufacturer determines
there is a storage limitation.
a. There are various storage limitations. The applicant needs to identify those storage
limitations, provide procedure for storage and a means to ensure the storage limitations are not
exceeded.
b. The information is normally contained in the chapter specifying the storage.
21. SPECIAL INSPECTION TECHNIQUES. Details for the application of special inspection
techniques including radiographic and ultrasonic testing where such processes are required.
Reference Appendix A, A27.3 (d). This is required when applicant specifies special inspection
techniques will be required.
a. The ICA should include the equipment required for the special inspection.
b. The ICA should include the procedure for conducting tests, including any precautions. See
Chapter 1, Paragraph 13.
c. The information is normally contained in the chapters requiring special inspection
techniques, or the applicant may have a section for special inspections, tests, and checks.
22. PROTECTIVE TREATMENT
Information needed to apply protective treatment to a structure after inspection. Reference
Appendix A, A27.3 (e). This is required when applicant determines protective treatment will be
required for structure.
a. The ICA should include procedures for applying protective treatment.
b. The ICA should specify type of materials to be used.
c. The ICA should include the precautions associated with the protective treatment.
REVISION: (PAGE NUMBER)
Revision 4 ( )-00-00 Page 8
Page Apdx A - 50
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.