FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page Apdx A-52

PDF page 1155 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1155
AC 27-1B · Apdx A-52Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 1                                                                  2/12/03

                                    (MANUAL IDENTIFICATION)
                     ATTACHMENT 1
                    PART 27 REQUIREMENTS
The following is a breakdown of Appendix A to FAR/JAR Part 27 and is intended to provide
guidance to assist an applicant for a Type Design Change under a Type Certificate (TC),
Supplemental Type Certificate (STC), or Field Approval (FA) requiring Instructions for
Continued Airworthiness (ICA). This breakdown is intended to provide guidance to assist an
applicant in understanding the ICA requirements of § 27.1529. An applicant may use the
guidance to prepare the ICA. Completion of this appendix will provide information needed for
the evaluation and will reduce the time required for evaluation of the proposed ICA. The open
parentheses ( ) in the Requirement Column indicates the status of ICA Requirements: Y =
applicable; N/A = non-applicable. In the Location Column, list the page number in the
Applicant’s ICA that contains the information.

Project Number(s) ___________ ____________ ____________

ACO/FSDO_______________________  Project Engineer __________________________

Applicant_____________________ Make____________ Model__________ Date__________
                         Requirement                             Regulation   Location
(    ) ICA for each engine                                          A27.1(b)
(    ) ICA for each rotor                                           A27.1(b)
(    ) ICA for each appliance required by this chapter                 A27.1(b)
(    ) Any required information relating to the interface of the         A27.1(b)
(    ) appliances, (    ) engines and (    ) rotors with the rotorcraft.
(    ) If ICA are not supplied by the manufacturer of an (    )         A27.1
appliance, (    ) engine or (    ) rotor installed in the rotorcraft, the
ICA for the rotorcraft must include (    ) the information essential to
the continued airworthiness of the rotorcraft.
(    ) A program showing how changes to the applicant’s ICA will be  A27.1(c)
distributed.
(    ) A program showing how changes to the ICA of the              A27.1(c)
manufacture of the engine(s), rotor(s) and appliances installed in
the rotorcraft will be distributed, if referenced in applicant’s ICA
(    ) ICA that must be in a form of a manual or manuals as          A27.2(a)
appropriate for the quantity of data.
(    ) A format of the manual or manuals which must provide for a    A27.2(b)
practical arrangement.
(    ) Content prepared in the English language.                    A27.3
(    ) Introduction information that includes (    ) an explanation of   A27.3(a)(1)
the rotorcraft’s features and (    ) data to the extent necessary for
maintenance and preventive maintenance.
FIGURE 1
REVISION:                                                     (DATE)
Revision 4                                                            Page 1


Page Apdx A - 52

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →