FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page Apdx A-19

PDF page 1122 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1122
AC 27-1B · Apdx A-19Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/12/03                                          AC 27-1B, Chg 1

                                      (MANUAL IDENTIFICATION)
                        CHAPTER 1
                       INTRODUCTION
                                    (Continued)

20. DISTRIBUTION
   a. The ICA must include a program to show:
      (1) Distribution of changes to the ICA made by the applicant.
      (2) Distribution of changes to the ICA made by the manufacturer of the engine or
engines, rotor or rotors, and appliances installed on the rotorcraft.
Reference Appendix A, A27.1 (c).

   b. The introduction of the applicant’s ICA should contain the procedure used to distribute
changes to persons who maintain the rotorcraft or who have incorporated the TDC.

   c. When the applicant has referenced FAA/AUTHORITY accepted publications in their ICA,
the procedure used to ensure changes to those referenced publications are distributed to persons
who maintain the rotorcraft or who have incorporated the TDC. The procedures should be
explained in the introduction of the applicant’s ICA.

   d. ICA normally includes a procedure for making changes to the applicant’s ICA. The
introduction should include a description of the revision procedure. The procedure should
contain information on the type of revisions, composition of the revision, revision control
procedure, revision log page, updating procedure, and procedure for purchase of revisions and
renewal of subscription.

21. ROTORCRAFT FEATURES
   a. The ICA must include introduction information that includes:
      (1) An explanation of the rotorcraft’s features; and,
      (2) Data to the extent necessary for maintenance and preventive maintenance.
Reference Appendix A, A27.3 (a)(1).

   b. The ICA normally contain a description which includes:
      (1) The explanation of the rotorcraft’s features:
         (a) General information about the rotorcraft features.
         (b) Exterior features.
          (c) Interior features including cockpit, and cabin.
         (d) Other features.

   c. A figure showing the features is helpful and does not require detailed explanation.

   d. The data necessary for maintenance and preventive maintenance is normally described in
the applicable chapter and is determined by the applicant.

REVISION:                                         (PAGE NUMBER)
Revision 4                                                        01-00-00 Page 7


                                                                  Page Apdx A - 19

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →